Happenings

Tokyo Auto Salon 2020: Part 1

IN Tokyo Auto Salon, Tokyo Auto Salon 2020, TAS, TAS 2020, Tokyo, Japan, Tuning, Modified

The Japanese tuning scene is ever-evolving. Just as you think there's nothing else they can do, the Japanese don't disappoint - as our trip to TAS 2020 revealed.

Part of that has almost certainly got to do with Singapore’s preference for four-door models, which would make us something of a priority market. For all intents and purposes, the 2 GC is essentially a four-door version of the new front-drive-based 1 Series (note: not an elongated version of the rear-drive 2 Series Coupe). And despite the “Coupe” part of its name, there’ll be a good chunk of local buyers who see this as the cheapest entry into a new BMW “sedan”, similar to its arch-rival, Mercedes-Benz’s CLA when it first arrived seven years ago.

Happenings

The BMW 2 Series Gran Coupe arrives in Singapore

218i and M235i variants are available; prices start from S$160k with COE

Hyundai Motor Group expects an adaptable all-electric platform using Canoo’s scalable skateboard architecture to allow for a simplified and standardised development process for Hyundai and Kia electrified vehicles, which is expected to help reduce cost that can be passed along to consumers. Hyundai Motor Group also expects to reduce complexity of its EV assembly line, allowing for rapid response to changing market demands and customer preferences. With this collaboration, Hyundai Motor Group doubles down on its recent commitment to invest $87 billion USD over the next five years to foster future growth. As part of this drive, Hyundai plans to invest $52 billion USD in future technologies through 2025, while Kia will invest $25 billion USD in electrification and future mobility technologies, aiming for eco-friendly vehicles to comprise 25% of its total sales by 2025.

Happenings

Hyundai Ties Up With Canoo to Develop Platform for Future EV Platform

IN EV, Electric Vehicle, Electric, Hyundai

A skateboard chassis as the basis for future EV platforms? Who would have thought of that? Well, Hyundai did...

There is so much science, technology, design, engineering and behind-the-scenes processes/efforts that goes into manufacturing an automobile that we so often take for granted.
Naturally, we are ecstatic to learn that Audi is the first manufacturer to offer online interactive factory tours (at the Ingolstadt site) with effect from Wednesday, 12th February 2020. From the comfort of your own homes or even on the go, you can learn how an Audi is made from production commencement to the last manual operation at the final assembly stage. Questions? Fret not! An experienced tour guide is present to accompany the virtual tour, share exclusive knowledge and answer any questions you may have on the live stream.

Happenings

Ever wondered how an Audi is made?

IN Audi, Audistream, Manufacturing

AudiStream takes you on a virtual journey into the production of the brand from Ingolstadt.

The 50kW DC chargers can fully charge a car in 30 minutes. Over the next few years, SP will introduce more high-powered DC charging points of up to 350kW. Other than SP’s, there are six other DC chargers in Singapore. SP’s new additions will be a game-changer in improving the charging turnaround time for EV drivers in Singapore. EV drivers can also enjoy at least 50 per cent cost savings compared to typical Internal Combustion Engine (ICE) vehicles for every kilometre travelled. The cost of using SP charging points will be regularly adjusted, mainly influenced by the prevailing electricity costs in Singapore.

Happenings

SP Group Offers EV Full Charging

IN EV, Electric Vehicle, Electric, SP Group

Electric vehicle (EV) users can now fully charge their vehicles in 30 minutes at SP Group’s island-wide charging network.

Happenings

Get Ready For A Quiet Revolution...

IN GMC, Hummer, EV, Electric Vehicle, Electric, Truck,

Yes, you've read that right. The Hummer is back as a fully electric truck with more than 1,000 hp and both on- and off-road capabilities.

“It’s one of the worst experiences for a driver, to find their car up on blocks with all four wheels gone. Some alloy wheels can cost thousands to replace, but these unique rim nuts will stop thieves in their tracks. Making wheels more secure and offering more product personalisation are further proof that 3D printing is a game-changer for car production.”

Raphael Koch, research engineer, Advanced Materials and Processes, Ford of Europe.

Happenings

Ford Develops 3D-Printed Wheel Nuts

IN Ford, Wheels, Rims, Tyres, Security, Technology

As car security systems become increasingly more sophisticated, thieves are targeting car parts instead, including alloy wheels. Ford has the solution...